DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B1
*: Under development
i
Click i button to return to main index Click Dana button to return to Section index
SH11C - Fixed displacement motors
Type
Displacement
cm
3
/rev [in
3
/rev]
Max. ow
l/min [U.S. gpm]
Max pressure
bar [psi]
Max peak pressure
bar [psi]
SH11C 010
10.3 [0.626] 82 [21.66] 430 [6235] 480 [6960]
SH11C 016
16 [0.976] 128 [33.81] 430 [6235] 480 [6960]
SH11C 020
19.9 [1.213] 125 [33.00] 430 [6235] 480 [6960]
SH11C 030
31.9 [1.945] 201 [53.06] 430 [6235] 480 [6960]
SH11C 045*
46 [2.807] 257 [67.89] 430 [6235] 480 [6960]
SH11C 055
56.35 [3.437] 282 [74.45] 430 [6235] 480 [6960]
SH11C 063
63.26 [3.859] 316 [83.42] 430 [6235] 480 [6960]
SH11C 075
77.82 [4.747] 350 [92.4] 430 [6235] 480 [6960]
SH11C 090
86.23 [5.26] 388 [102.5] 430 [6235] 480 [6960]
SH11C 108
108.4 [6.612] 433 [114.31] 430 [6235] 480 [6960]
SH11C 125
124.8 [7.613] 500 [132.00] 430 [6235] 480 [6960]
SH11C 160
163.9 [9.998] 590 [155.76] 430 [6235] 480 [6960]
SH11C 180
178.1 [10.864] 641 [169.22] 430 [6235] 480 [6960]
SH11C motors are a family of fixed displacement, bent axis piston motors for operation in both open and closed circuit.
The proven design incorporating the lens shape valve plate, the high quality components and manufacturing techniques make the SH11C
motors to able provide up to 430 bar [6235 psi] continuous and 480 bar [6960 psi] peak performance.
Fully laboratory tested and field proven, these units provide maximum efficiency and longlife. Heavy duty bearings permit high radial and
axial loads.
Versatile design includes a variety of port plates, shaft ends and valves packages that will fit the SH11C motors to any application both
industrial and mobile. SH11C motors are available in both ISO and SAE version.
Index
General information - Features ......................................................B2
Technical data ..............................................................................B5
SH11C 010-016 Fan motors ........................................................B6
Ordering code ..............................................................................B7
Dimensions ISO 4 Bolts flange ....................................................B13
Dimensions SAE B 2 Bolts flange ...............................................B19
Other caratteristics .....................................................................B25
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B2
P1 P2 P3
i
Click i button to return to main indexClick DANA button to return to Section Index
General information - Features
Hydraulic uids:
Use fluids with mineral oil basis and anticorrosive, antioxidant and wear preventing addition agents (HL or HM). Viscosity range at
operating temperature must be of 15 ÷40 cSt. For short periods and upon cold start, a max. viscosity of 800 cSt is allowed, for different
types of viscosity please contact Dana. Viscosities less then 10 cSt are not allowed. A viscosity range of 10 ÷ 15 cSt is allowed for extreme
operating conditions and for short periods only.
Temperature ranges:
The operating temperature of the oil must be within -25ºC÷ 115ºC [-13ºF ÷ 239ºF]. For applications with lower temperatures please
contact Dana.
Filtering:
A correct filtering is essential for long and satisfactory life of axial piston units. In order to ensure a correct functioning of the unit, the max.
permissible contamination class is 21/19/16 according to ISO 4406:1999.
Operating pressure:
The maximum permissible pressure on pressure ports is 430 bar [6235 psi] continuous and 480 bar [6960 psi] peak. If two motors are
connected in series, total working pressure P1+P2 has to be limited 700 bar max. [10150 psi].
Simbology:
C
N/bar
[lbf/psi]
Load
F
ax max
N
[lbf]
Axial pushing load
F
ax max
N
[lbf]
Axial pulling load
F
q
N
[lbf]
Radial load
F
q max
N
[lbf]
Maximum permissible radial load
J
kg·m
2
[lbf·ft
2
]
Moment of inertia
m
kg
[lbs]
Weight
n
max
rpm Maximum speed
p
max
bar
[psi]
Maximum continuous pressure
p
peak
bar
[psi]
Maximum pressure peak
Q
max
l/min
[U.S. gpm]
Maximum flow
Q
d
l/min
[U.S. gpm]
External drain flow
T
k
Nm/bar
[lbf.ft/psi]
Torque costant
T
max
Nm
[lbf.ft]
Maximum torque at pressure continuous
T
peak
Nm
[lbf.ft]
Maximum torque at pressure peak
V
g
cm
3
/rev
[in
3
/rev]
Displacement
P
max
kW
[hp]
Maximum power at p
nom
η
hm
% Mech-hyd. efficiency
η
v
% Volumetric efficiency
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B3
Fq
Fax
+
X/2 X/2
F
ax
-
barpsi
p
n
rpm
0 1000 2000 3000 4000 5000 6000 7000 8000
160-180 108-125
075-090
045-055-063
020-030
010-016
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
i
Click i button to return to main index Click Dana button to return to Section index
Case drain pressure:
Maximum permissible case drain pressure is 10 bar [145 psi]. A higher pressure can damage the main shaft seal or reduce its life.
General information - Features
Output shaft:
Table is a guide to determine max. permissible loads. Values are calculated in such a way to assure at least 80% of the bearing operating
life where no external load is applied. The published values are related to loads applied in the middle of shaft and in the least favourable
direction.
* : under development
1) : in the following table, values of Fq
max
for the output shafts
When an external side (radial) load is applied to the drive shaft, the bearing life will vary accordingly to the magnitude, location and
direction of the load. The diagram shows how the bearing operating life varies versus the direction of the load. In the diagram 100%
represents the bearing operating life where no external side load is applied to the drive shaft.
Size
010 016 20 30 045* 55 63 75 90 108 125 160 180
Radial load F
q max
N
[lbf]
3000
[674.4]
3200
[719.4]
4300
[967.5]
6100
[1372.5]
8350
[1877.2]
9200
[1]
[2068]
10300
[1]
[2317.5]
11500
[1]
[2587.5]
12900
[1]
[2902.5]
13600
[1]
[3060]
15900
[1]
[3577.5]
18400
[1]
[4140]
20600
[1]
[4635]
Load
N/bar
[lbf/psi]
8.5
[0,128]
9
[0,135]
12
[0.18]
19
[0.285]
23.8
[0,357]
25
[0.375]
30
[0.45]
25.7
[0.386]
28.5
[0.428]
35
[0.525]
37
[0.555]
41
[0.615]
45
[0.675]
Axial pulling
load
F
ax max
N
[lbf]
250 bar
[3625 psi]
550
[123.6]
850
[191.1]
1000
[225]
1300
[292.5]
1740
[391.2]
1920
[432]
2150
[484]
2300
[517.5]
2800
[630]
2900
[652.5]
3300
[742.5]
3800
[855]
4050
[911.2]
350 bar
[5075 psi]
800
[179.8]
1050
[236.0]
1300
[292.5]
1800
[405]
2400
[539.5]
2650
[596]
2990
[673]
3550
[798.75]
3800
[855]
4050
[911.25]
4550
[1023.7]
5300
[1192.5]
5800
[1305]
Axial pushing
load
F
ax max
N
[lbf]
< 100 bar
[< 1450 psi]
320
[71.9]
320
[71.9]
500
[112.5]
500
[112.5]
800
[179.8]
800
[180]
800
[180]
1000
[225]
1000
[225]
1250
[281.25]
1250
[281.25]
1600
[360]
1600
[360]
> 100 bar
[> 1450 psi]
3
[0,045]
3
[0,045]
5
[0.075]
5
[0.075]
8.7
[0,131]
9
[0.135]
9
[0.135]
12
[0.18]
12
[0.18]
13
[0.195]
13
[0.195]
17
[0.255]
17
[0.255]
Max permissible radial force on the shaft:
SAI (SH11C 055-063) SAM (SH11C 075-090) SAO (SH11C 108-125) SAP (SH11C 160-180)
Radial load F
q max
N
[lbf]
6500
[1462.5]
6500
[1462.5]
6500
[1462.5]
6500
[1462.5]
Speed
Pressure
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B4
130%
120%
110%
100%
90%
70%
80%
-180 -135 -90 -45 0 45 90 135 180
φ (°)
φ
φ
B A
i
Click i button to return to main indexClick DANA button to return to Section Index
Seals:
Seals used on SH11C series are of FKM (Fluoroelastomer). In case of use of special fluids, contact Dana.
Minimum rotating speed:
No limit to Minimum speed; if uniformity of rotation is required, speed must not be less than 50 rpm. In case of use of special applications,
contact Dana.
Installation:
SH11C series motors can be installed in every position or direction. These axial piston units have separate ports and drain chambers and
so must be always drained. For further details see on the General Information Catalogue, the section “General installation guidelines”.
Flangeable valves:
Flangeable valves are available for motors both in open and closed loop. For more information see the catalogue Axial Valves.
Flushing valves:
The motors can be equipped with flushing valves.
The mount the flushing valve on motors, it is necessary to use a special port cover. For more information see the catalogue Axial Valves.
Relation between direction of rotation and direction of ow:
The relation between direction of rotation of shaft and direction of flow in SH11C piston units is shown in the picture below.
General information - Features
Reversible motor
The bearing operating life increases up to 30% when the load is applied with some peculiar directions and the maximum increase is
dependent on the operating pressure and the nominal size of the unit.
When considering the permissible axial force, the force - transfer direction must be taken in account:
• Pushing axial loads increase the bearing life.
• Pulling axial loads reduce the bearing life (if possible pulling axial loads should be avoided).
CW motor CCW motor
Alternating rotation
CW motor CCW motor
Bearing life (%)
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B5
i
Click i button to return to main index Click Dana button to return to Section index
*: Under development
1) Approximate values.
2) Average values at 250 bar [3625 psi] with mineral oil at 45°C [113°F] and 35 cSt of viscosity.
Technical data
Theorical values, without considering η
hm
and η
v
approximate values. Peak operations must not exceed 1% of every minute.
A simultaneous maximum pressure and maximum speed not recommended.
Size
010 016 20 30 045* 55 63 75 90 108 125 160 180
Displacement V
g
cm
3
/rev
[in
3
/rev]
10.3
[0.626]
16
[0.976]
19.9
[1.213]
31.9
[1.945]
46
[2.807]
56.35
[3.437]
63.26
[3.859]
77.82
[4.747]
86.23
[5.26]
108.4
[6.612]
124.8
[7.613]
163.9
[9.998]
178.1
[10.864]
Max. pressure p
max
bar
[psi]
430
[6235]
430
[6235]
430
[6235]
430
[6235]
430
[6235]
430
[6235]
430
[6235]
430
[6235]
430
[6235]
430
[6235]
430
[6235]
430
[6235]
430
[6235]
Max. peak pressure p
peak
bar
[psi]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
480
[6960]
Max. speed n
max
rpm 8000 8000 6300 6300 5600 5000 5000 4500 4500 4000 4000 3600 3600
Max. ow Q
max
l/min
[US gpm]
82
[21.66]
128
[33.81]
125
[33]
201
[53.06]
257
[67.89]
282
[74.45]
316
[83.42]
350
[92.4]
388
[102.5]
433
[114.31]
500
[132]
590
[155.76]
641
[169.22]
Max. power at p
max
P
max
kW
[hp]
59
[79.1]
92
[123.4]
90
[120.6]
144
[192.96]
184
[246.7]
202
[270.68]
226
[302.84]
251
[336.34]
278
[372]
310
[415.4]
358
[479.72]
423
[566.82]
459
[615.06]
Torque costant T
k
Nm/bar
[lbf.ft/psi]
0.16
[0.008]
0.25
[0.013]
0.3
[0.015]
0.5
[0.025]
0.73
[0.037]
0.9
[0.045]
1
[0.05]
1.2
[0.06]
1.4
[0.07]
1.7
[0.085]
2
[0.1]
2.6
[0.13]
2.8
[0.14]
Max. torque at p
max
T
max
Nm
[lbf.ft]
71
[52.36]
110
[81.13]
136
[100.23]
218
[160.66]
315
[232.33]
386
[284.48]
433
[319.12]
533
[392.82]
590
[435.13]
742
[546.85]
855
[630.13]
1122
[826.91]
1219
[898.40]
Max peak torque at p
peak
T
peak
Nm
[lbf.ft]
79
[58.27]
122
[89.98]
152
[112.02]
244
[179.82]
352
[260.36]
431
[317.65]
484
[356.71]
595
[438.51]
659
[486.05]
829
[610.97]
954
[703.10]
1253
[923.46]
1361
[1003.06]
Moment of inertia
(1)
J
kg·m
2
[lbf.ft
2
]
0.0005
[0,0118]
0.0005
[0,0118]
0.001
[0.0235]
0.001
[0.0235]
0.004
[0.094]
0.004
[0.094]
0.004
[0.094]
0.007
[0.1645]
0.007
[0.1645]
0.012
[0.2820]
0.012
[0.2820]
0.022
[0.5170]
0.022
[0.5170]
Weight
(1)
m
kg
[lbs]
6
[13.22]
6
[13.22]
10
[22.04]
10
[22.04]
18
[39.68]
19
[41.876]
19
[41.876]
23.7
[52.23]
23.7
[52.23]
35
[77.14]
35
[77.14]
48
[105.79]
48
[105.79]
External drain ow
(2)
Q
d
l/min
[US gpm]
0.8
[0.2113]
0.8
[0.2113]
1
[0.264]
1
[0.264]
1.2
[0.317]
1.2
[0.317]
1.2
[0.317]
2.5
[0.66]
2.5
[0.66]
3
[0.79]
3
[0.79]
3
[0.79]
3
[0.79]
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B6
i
Click i button to return to main indexClick DANA button to return to Section Index
SH11C 010-016 Fan motors
SH11C 10-16 cc motors are common in fan application. Typical need of this application are built-in check valve in anti-cavitation function.
The fan motor can work safely at very high speed without reliability problems thanks to anti-cavitation valve.
When the flow to the motor is shut off and the motor is rotating at high speed, the anti-cavitation valve will open and direct flow to the
motor inlet port. To execute this function, it is necessary that sufficient return port back pressure is available. If the inlet pressure is
insufficient, motor cavitation will be experienced.
A back pressure, in an open circuit, can be created by a counter pressure valve through the line to the tank; if possible, it should be pilot
operated to minimize power losses. A back pressure of about 8÷10 bar is sufficient in most applications.
Ordering code due to the built-in anti-cavitation valve, the direction of rotation of the motor must be specified when ordering the motor.
Typical applications
• Head exchangers
• Air seeders
• Blowers
Clockwise
Rear cover VMD
Counter Clockwise
Rear cover VMS
A - B Service ports
T1 - T2 Drain ports
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B7
i
Click i button to return to main index Click Dana button to return to Section index
The following alphanumeric codes system has been developed to identify all of the configuration options for the SH11C motors. Use the
model code below to specify the desired features.
All alphanumeric digits system of the code must be present when ordering.
We advise to carefully read the catalogue before filling the ordering code.
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Series
Motor
Size
Version
Mount ange
Shaft end
Port cover
Direction of
rotation
Seal
Valve
Valve feature
Flushing valve
Special feature
Painting
SH11C M 030 ME OC CMB LM1 RV V VCDM 000 06 03 01
Ordering code
1
Series
SH11C
Fixed displacement, bent axis, axial piston unit
* : under development
3
Size
010
10.3 cm
3
/rev [0.626 in
3
/rev]
016
16 cm
3
/rev [0.976 in
3
/rev]
020
19.9 cm
3
/rev [1.213 in
3
/rev]
030
31.9 cm
3
/rev [1.945 in
3
/rev]
045*
46 cm
3
/rev [2.807in
3
/rev]
055
56.35 cm
3
/rev [3.437 in
3
/rev]
063
63.26 cm
3
/rev [3.859 in
3
/rev]
075
77.82 cm
3
/rev [4.747 in
3
/rev]
090
86.23 cm
3
/rev [5.260 in
3
/rev]
108
108.4 cm
3
/rev [6.612 in
3
/rev]
125
124.8 cm
3
/rev [7.613 in
3
/rev]
160
163.9 cm
3
/rev [9.998 in
3
/rev]
180
178.1 cm
3
/rev [10.984 in
3
/rev]
4
Version
ME
ISO
SE
SAE
2
Motor
M
Motor
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B8
1 2 3 4 5 6 7 8 9 10 11 12 13 14
SH11C M 030 ME OC CMB LM1 RV V VCDM 000 06 03 01
i
Click i button to return to main indexClick DANA button to return to Section Index
* : under development
Ordering code
1) The ME digit means that the flange in only available for the ISO version.
2) The SE digit means that the flange in only available for the SAE version.
5
Mount ange
Size
010 - 016 020 - 030 045* - 055 - 063 075 - 090 108 - 125 160 - 180
OA
ISO 4 holes Ø 80 mm [Ø3.15 in]
ME – – – – –
OB
ISO 4 holes Ø 100 mm [Ø3.937 in]
– ME – – – –
OC
ISO 4 holes Ø 125 mm [Ø4.921 in]
– – ME – – –
OD
ISO 4 holes Ø 140 mm [Ø5.511 in]
– – – ME – –
OE
ISO 4 holes Ø 160 mm [Ø6.299 in]
– – – – ME –
OF
ISO 4 holes Ø 180 mm [Ø7.086 in]
– – – – – ME
02
SAE-B 2 holes
SE – – – – –
05
SAE-C 4 holes
– SE SE SE – –
08
SAE-D 4 holes
– – – – SE SE
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B9
1 2 3 4 5 6 7 8 9 10 11 12 13 14
SH11C M 030 ME OC CMB LM1 RV V VCDM 000 06 03 01
i
Click i button to return to main index Click Dana button to return to Section index
Ordering code
* : under development
1) The ME digit means that the flange in only available for the ISO version.
2) The SE digit means that the flange in only available for the SAE version.
6
Shaft end
Size
010 - 016 020 - 030 045* - 055 - 063 075 - 090 108 - 125 160 - 180
CAV
Parallel keyed Ø20 mm k6 [0.787 in k6]
Key 6x6x30 [0.23x0.23x1.18]
ME – – – – –
CMB
Parallel keyed Ø25 mm k6 [0.984 in k6]
Key 8x7x32 [0.31x0.27x1.25]
ME – – – – –
CBM
Parallel keyed Ø25 mm k6 [0.984 in k6]
Key 8x7x40 [0.31x0.27x1.57]
– ME – – – –
CBN
Parallel keyed Ø 30 mm k6 [1.181 in k6]
Key 8x7x40 [0.31x0.27x1.57]
– ME – – – –
CAW
Parallel keyed Ø 30 mm k6 [1.181 in k6]
Key 8x7x50 [0.31x0.27x1.97]
– – ME – – –
CBP
Parallel keyed Ø 40 mm k6 [1.574 in k6]
Key 12x8x56 [0.47x0.31x2.204]
– – – ME – –
CAK
Parallel keyed Ø 40 mm k6 [1.574 in k6]
Key 12x8x63 [0.47x0.31x2.48]
– – – – ME –
CAJ
Parallel keyed Ø 45 mm k6 [1.772 in k6]
Key 14x9x63 [0.55x0.35x2.48]
– – – – ME–SE –
CBQ
Parallel keyed Ø 45 mm k6 [1.772 in k6]
Key 14x9x70 [0.55x0.35x2.75]
– – – – – ME
CAX
Parallel keyed Ø 50 mm k6 [1.968 in k6]
Key 14x9x70 [0.55x0.35x2.75]
– – – – – ME–SE
CAY
Parallel keyed Ø 35 mm k6 [1.377 in k6]
Key 10x8x56 [0.39x0.31x2.204]
– – – ME – –
SAF
Splined W20x1.25x30x14x9g DIN 5480 ME – – – – –
SAG
Splined W25x1.25x18x9g DIN 5480 ME ME – – – –
SAI
Splined W30x2x14x9g DIN 5480 – ME ME – – –
SAM
Splined W35x2x16x9g DIN 5480 – – ME ME – –
SAO
Splined W40x2x18x9g DIN 5480 – – – ME ME –
SAP
Splined W45x2x21x9g DIN 5480 – – – – ME ME
SAR
Splined W50x2x24x9g DIN 5480 – – – – – ME
C16
Parallel keyed Ø 22.22 mm [0.874 in]
Key 6.35x6.25x25.4 [0.25x0.246x1]
– SE – – – –
C17
Parallel keyed Ø 31.75 mm [1.25 in]
Key 7.93x7.3x40 [0.31x0.287x1.57]
– – SE – – –
C18
Parallel keyed Ø 44.45 mm [1.75 in]
Key 11.11x9.2x60 [0.43x0.36x2.36]
– – – – SE SE
S05
Splined 13T 16/32 DP SE SE – – – –
S12
Splined 14T 12/24 DP – SE SE SE – –
S15
Splined 13T 8/16 DP – – – – SE SE
S16
Splined 23T 16/32 DP – – – – SE –
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B10
1 2 3 4 5 6 7 8 9 10 11 12 13 14
SH11C M 030 ME OC CMB LM1 RV V VCDM 000 06 03 01
i
Click i button to return to main indexClick DANA button to return to Section Index
10
Valve
Size
010 - 016 020 - 030 045* - 055 - 063 075 - 090 108 - 125 160 - 180
XXXX
None
• • • • •
•
VCDM
VCD/M Pilot assisted overcentre valve
– VM2–FM2 VM2–FM2 VM2–FM2 VM2–FM2 VM2–FM2
VCD1
VCD/1 Pilot assisted overcentre valve
– – LM2 LM2 LM2 LM2
VCD2
VCD/2 Pilot assisted overcentre valve
– – – LM2 LM2 LM2
VCR1
VCR1 D/AF Double acting overcentre valve
– VM2–FM2 – – – –
VCR3
VCR3 Double acting overcentre valve
– – VM2–FM2 VM2–FM2 VM2–FM2 VM2–FM2
VU16
VU165 Check valve
– LM2 – LM2 – –
VSD1
SD 120 anti-shock valve
– – – – – LM2
* : under development
• : Available
The valves are available with ISO port cover only, please contact Technical department for SAE version.
The VM2-FM2-LM2 digits means that the valves are only available with VM2-FM2-LM2 port covers.
7
Port cover
Size
010 - 016 020 - 030 045* - 055 - 063 075 - 090 108 - 125 160 - 180
LM1
Lateral ports
SE – – – –
–
LM2
Lateral ports
– ME–SE ME–SE ME–SE ME–SE
ME–SE
LM3
Lateral ports
ME ME ME – –
–
FM2
Frontal ports
– ME–SE ME–SE ME–SE ME–SE
ME–SE
FM3
Frontal ports
ME ME ME – –
–
VM2
Lateral ports same side
– ME–SE ME–SE ME–SE ME–SE
ME–SE
VMD
Lateral ports same side with valve CW
ME – – – –
–
VMS
Lateral ports same side with valve CCW
ME – – – –
–
VSD
Lateral ports same side with valve CW
SE – – – –
–
VSS
Lateral ports same side with valve CCW
SE – – – –
–
* : under development
1) The ME digit means that the flange in only available for the ISO version.
2) The SE digit means that the flange in only available for the SAE version.
8
Direction of rotation (viewed from shaft side)
RV
Reversible
9
Seal
V
FKM
Ordering code
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B11
1 2 3 4 5 6 7 8 9 10 11 12 13 14
SH11C M 030 ME OC CMB LM1 RV V VCDM 000 06 03 01
i
Click i button to return to main index Click Dana button to return to Section index
11
Valve feature
Valve
XXXX VCDM VCD1 VCD2 VCR1 VCR3 VU16 VSD1
000
Feature not necessary
•
– – – –
•
– –
001
Not Set 30÷350 bar [435 to 5075 psi]
(Piloting ratio 6.2:1)
– – – –
•
– – –
002
Not Set 0÷350 bar [0 to 5075 psi]
(Piloting ratio 2.9:1) - Control of rotation CW
– –
•
– – – – –
006
Not Set 0÷350 bar [0 to 5075 psi]
(Piloting ratio 2.9:1) - Control of rotation CCW
– –
•
– – – – –
004
Not Set 30÷350 bar [435 to 5075 psi]
(Piloting ratio 6.2:1) - Control of rotation CW
–
•
– – – – – –
005
Not Set 30÷350 bar [435 to 5075 psi]
(Piloting ratio 6.2:1) - Control of rotation CCW
–
•
(1)
– – – – – –
003
Not Set 250÷500 bar [3625 to 7250 psi]
(Piloting ratio 13:1) - Control of rotation CW
– – –
•
– – – –
007
Not Set 250÷500 bar [3625 to 7250 psi]
(Piloting ratio 13:1) - Control of rotation CCW
– – –
•
– – – –
008
Not Set (Max setting 350 bar [5075 psi])
Max Flow 65 l/min [17.2 U.S. gpm]
Control of rotation CW
– – – – – –
•
–
009
Not Set (Max setting 350 bar [5075 psi])
Max Flow 65 l/min [17.2 U.S. gpm]
Control of rotation CCW
– – – – – –
•
–
014
Not Set (Max setting 350 bar [5075 psi])
Control of rotation CW
– – – – – – –
•
015
Not Set (Max setting 350 bar [5075 psi])
Control of rotation CCW
– – – – – – –
•
• : Available
1) : Not available with VM2 port cover.
Please contact Technical department for valve which requie specific setting.
For the technical specifications see catalogue valves.
Ordering code
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B12
1 2 3 4 5 6 7 8 9 10 11 12 13 14
SH11C M 030 ME OC CMB LM1 RV V VCDM 000 06 03 01
i
Click i button to return to main indexClick DANA button to return to Section Index
Ordering code
1) Available with VM2 port cover
2) Available with FM2 port cover
3) Available only in ME (ISO) version and LM2 port Cover
* : under development
• : Available
13
Special feature
Size
010 - 016 020 - 030 045* - 055 - 063 075 - 090 108 - 125 160 - 180
XX
None
• • • • •
•
03
SAE version with ISO port cover
•
–
•
(1)
•
(2)
–
•
(2)
RD
Drain plugs reversed –
• • • •
•
TS
Prepared for tachometer sensor –
• • • •
•
TZ
Tachometer + sensor 2-channel-Hall effect –
• • • •
•
14
Painting
XX
None
01
Painted RAL 9005
02
Painted RAL 5015
* : under development
• : Available
It is not possible to combine the flushing valves with valve on table 10. For the technical specifications see catalogue valves.
1) The ME digit means that the flange in only available for the ISO version.
2) The SE digit means that the flange in only available for the SAE version.
12
Flushing valve
Size
010 - 016 020 - 030 045* - 055 - 063 075 - 090 108 - 125 160 - 180
XX
None
• • • • • •
PR
Arranged for Flushing Valve
– LM2 LM2 LM2 LM2 LM2
06
VSC/F Flushing valve - 6 l/min [1.58 U.S. gpm]
– LM2-VM2 LM2-VM2 LM2-VM2 LM2-VM2 LM2-VM2
09
VSC/F Flushing valve - 10.5 l/min [2.77 U.S. gpm]
– LM2-VM2 LM2-VM2 LM2-VM2 LM2-VM2 LM2-VM2
15
VSC/F Flushing valve - 15 l/min [3.96 U.S. gpm]
– LM2-VM2 LM2-VM2 LM2-VM2 LM2-VM2 LM2-VM2
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B13
FM3 - LM3
120.2 [4.73]
29 [1.14]
6 [0.24]
18.2 [0.72]
20 [0.79]
60 [2.36]
12 [0.47]
S2
S1
R
58 [2.28]
11.1 [0.44]
Ø 79.5 [3.13]
Ø 80 [3.15]
40°
95 [3.741]
96 [3.78]
Ø
9 [0.35]
Ø
100 [3.94]
SH11C 010-016 ME
90 [3.54]
34 [1.34]
59.1 [2.33]
76.4 [3.01]
104.2 [4.10]
134.7 [5.30]
178.6 [7.03]
155.3 [6.11]
M22x1.5
M22x1.5
c
20 [0.79]
20 [0.79]
M22x1.5
20 [0.79]
VMD - VMS
97.6 [3.84]
103.2 [4.06]
47.5 [1.87] 48 [1.89]
157.3 [6.19]
M22x1.5
20 [0.79]
M22x1.5
46[1.81]
20 [0.79]
Key 6x6x30 UNI 6604
5 [0.20]
30 [1.18]
60 [2.36]
20 [0.79]
16
[0.63]
21[0.83]
22.5 [0.89]
Ø20 [0.78]
6 [0.236]
Key 8x7x32 UNI 6604
5 [0.20]
32 [1.26]
60 [2.36]
20 [0.79]
22 [0.87]
30 [1.18]
Ø25 [0.98]
28 [1.10]
M10x1.0 [0.39]
Spline W25x1.25x30x18x9g
DIN 5480
22 [0.87]
22 [0.87]
20 [0.79]
40 [1.89]
M10x1.0
Spline W20x1.25x30x14x9g
DIN 5480
22 [0.87]
54 [2.13]
20 [0.79]
[0.63]
16
M6
i
Click i button to return to main index Click Dana button to return to Section index
Dimensions ISO 4 Bolts ange
7
Port cover
S1, S2: Drain ports (1 plugged) - 3/8 G (BSPP)
A, B: Service line ports
R: Air bleed (plugged) - 1/8 G (BSPP)
6
Shaft end
Depth Depth
Depth
Detail C
Depth
Depth
CAV
Parallel
keyed shaft
CMB
Parallel
keyed shaft
SAG
Splined
shaft
SAF
Splined
shaft
(OA)
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B14
SH11C 020-030 ME
134 [5.28]
118 [4.64]
23.2 [0.91]
18 [0.71]
64 [2.25]
8 [0.31]
27 [1.06]
R
S1
S2
Ø 100 [3.94]
Ø 95 [3.74]
118 [4.65]
Ø 11 [0.43]
Ø 125 [4.92]
67 [2.64] 10.7 [0,42]
40°
FM3 - LM3 FM2
191.1 [7.52]
127 [5]
58 [2.28]
3/4 G [BSPP]
3/4 G [BSPP]
173.1 [6.82]
C
108.9 [4.29]
87.4 [3.44]
191.1 [7.52]
173.1 [6.82]
108.9 [4.29]
87.4 [3.44]
18.24 [0.718]
127 [5.00]
59 [2.32]
40.49 [1.594]
M8
1/2” SAE 6000 1/2” SAE 6000
C
VM2 LM2
18.24 [0.718]
90.2 [3.55]
183.7 [7.23]
159 [6.26]
1/2” SAE 6000
1/2” SAE 6000
C
115 [4.53]
59 [2.32]
40.49 [1.594]
M8
191.1 [7.52]
40.49 [1.594]
18.24 [0.718]
119 [4.69]
173.1 [6.82]
108.9 [4.29]
87.4 [3.44]
M8
1/2” SAE 6000
1/2” SAE 6000
28 [1.10]
Ø 25 [0.984]
M8
Key
8x7x40 UNI 6604
25 [0.98]
75 [2.95]
28 [1.10]
19 [0.74]
33 [1.29]
Ø30 [1.181]
M10
8x7x40 UNI 6604
Key
25 [0.98]
75 [2.95]
30 [1.18]
22 [0.86]
Ø24.8 [0.976]
M8
Spline
W25x1.25x30x18x9g DIN 5480
58.1 [2.28]
25.1 [0.98]
28 [1.10]
19 [0.74]
Ø29.6 [1.165]
M10
Spline
W30x2x30x16x9g DIN 5480
30 [1.18]
22 [0.86]
60 [2.36]
25 [0.98]
i
Click i button to return to main indexClick DANA button to return to Section Index
S1, S2: Drain ports (1 plugged) - 3/8 G (BSPP)
A, B: Service line ports
R: Air bleed (plugged) - 1/8 G (BSPP)
7
Port cover
6
Shaft end
Detail C
Detail C
Detail C
Detail C
CBM
Parallel
keyed shaft
CMN
Parallel
keyed shaft
SAG
Splined
shaft
SAI
Splined
shaft
Dimensions ISO 4 Bolts ange (OA)
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B15
31 [1.22]
150 [5.91]
65.5 [2.58]
10 [0.393] 10 [0.393]
59.5 [2.34]
S1
R
S2
Ø160 [6.299]
Ø13 [0.512]
79.5 [3.13]
70 [2.76]
78 [3.07]
75.5 [2.97]
Ø125 [4.921 ]
0
-0.063
0
0.00248
40°
45°
45°
FM3 - LM3 FM2
VM2 LM2
215.3 [8.48]
147 [5.79]
58 [2.283]
G 1”BSPPG 1”BSPP
194.5 [7.66]
168.8 [6.65]
A
B
C
Visto da C/Detail C
137.8 [5.43]
88.4 [3.48]
109.9 [4.33]
147 [5.79]
75 [2.953]
155 [6.10]
50.8 [2.00]
215.3 [8.48]
194.5 [7.66]
3/4” SAE 6000
3/4” SAE 6000
C
M10 Prof.18
M10 Depth [0.708]
Visto da C/Detail C
137.8 [5.43]
109.9 [4.33]
23.8 [0.937]
205 [8.07]
176.8 [6.96]
50.8 [2.00]
147 [5.79]
75 [2.953]
3/4” SAE 6000
3/4” SAE 6000
Visto da C/Detail C
C
M10 Prof.18
M10 Depth [0.708]
130.3 [5.13]
111.1 [4.37]
23.8 [0.937]
215.3 [8.48]
168.8 [6.65]
147 [5.79]
A B
3/4” SAE 6000
3/4” SAE 6000
137.8 [5.43]
50.8 [2.00]
23.8 [0.937]
88.4 [3.48]
C
M10 Prof.18
M10 Depth [0.708]
Ø19 [0.748]
Ø19 [0.748]
Visto da C/Detail C
92 [3.62]
14.5 [0.57]
32 [1.26]
Key
8x7x50 UNI 6604
M10
33 [1.30]
Ø30 [1.181 ]
0.015
0.002
0.0006
0.00008
32 [1.26]
22 [0.87]
32 [1.26]
72 [2.83]
Spline
W35x2x30x16x9g DIN 5480
Ø34.5 [1.36]
M12
24 [0.94]
22 [0.87]
67 [2.64]
32 [1.26]
Spline
W30x2x30x14x9g DIN 5480
Ø29.6 [1.17]
M10
SH11C 045-055-063 ME
i
Click i button to return to main index Click Dana button to return to Section index
7
Port cover
6
Shaft end
Dimensions ISO 4 Bolts ange (OC)
S1, S2: Drain ports (1 plugged) - 1/2 G (BSPP)
A, B: Service line ports
R: Air bleed (plugged) - 1/8 G (BSPP)
CAW
Parallel
keyed shaft
SAM
Splined
shaft
SAI
Splined
shaft
18 [0.708] Depth
Detail C
Detail C
Detail C
Detail C
18 [0.708] Depth
18 [0.708] Depth
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B16
SH11C 075-090 ME
29 [1.14]
62.8 [2.47]
10 [0.39] 14 [0.55]
S2
R
S1
155.7 [6.13]
164.8 [6.49]
Ø13 [0.51]
Ø180 [7.086]
83.1 [3.27]
85.5 [3.37]
12.1 [0.48]
83 [3.27]
45°
45°
Ø140 [5.511 ]
0
-0.063
0
0.00248
40°
LM2 FM2
VM2
232.7 [9.16]
166 [6.54]
183.2 [7.212]
Visto da C/Detail C
1” SAE 6000
1” SAE 6000
148.5 [5.85]
Ø25 [0.98]
Ø25 [0.98]
95.1 [3.744]
27.76 [1.093]
57.15 [2.25]
C
M12 Prof.18
M12 Depth [0.708]
A B
232.7 [9.16]
208.5 [8.208]
174 [6.85]
166 [6.54]
57.15 [2.25]
84 [3.307]
1” SAE 6000
1” SAE 6000
Visto da C/Detail C
148.5 [5.85]
27.76 [1.093]
116.3 [4.578]
M12 Prof.18
M12 Depth [0.708]
C
192.4 [7.57]
225.4 [8.88]
166 [6.54]
84 [3.307]
57.15 [2.25]
1” SAE 6000 1” SAE 6000
Visto da C/Detail C
M12 Prof.19
M12 Depth [0.748]
144.7 [5.70]
122.7 [4.83]
27.76 [1.093]
C
122.7 [4.83]
C
Key
AS 10x8x56
M12
32.15 [1.265]
102.1 [4.02]
28 [1.102]
38 [1.49]
Ø35 [1.378 ]
0.018
0.002
0.0007
0.00007
Key
AS 12x8x56
36 [1.41]
M16
32.15 [1.265]
102.1 [4.02]
43 [1.69]
Ø40 [1.575 ]
0.018
0.002
0.0007
0.00007
Spline
W35x2x30x16x9g DIN 5480
32.15 [1.26]
72.1 [2.84]
28 [1.102]
32 [1.26]
Ø34.5 [1.36]
M12
77.15 [3.04]
32.15 [1.265]
Spline
W40x2x30x18x9g DIN 5480
36 [1.42]
37 [1.45]
Ø39.5 [1.55]
M16
i
Click i button to return to main indexClick DANA button to return to Section Index
Dimensions ISO 4 Bolts ange (OD)
S1, S2: Drain ports (1 plugged) - 1/2 G (BSPP)
A, B: Service line ports
R: Air bleed (plugged) - 1/8 G (BSPP)
7
Port cover
6
Shaft end
Detail C
Detail C
Detail C
18 [0.708] Depth
18 [0.708] Depth
19 [0.748] Depth
CAY
Parallel
keyed shaft
CBP
Parallel
keyed shaft
SAM
Splined
shaft
SAO
Splined
shaft
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B17
SH11C 108-125 ME
183.2 [7.212]
23 [0.91]
17.5 [0.688]
Ø158 [6.22]
10 [0.39]
36.5 [1.44]
59.5 [2.342]
14.7 [0.578]90 [3.543]
Ø160 [6.299 ]
0
-0.063
0
-0.0024
40°
Ø200 [7.874]
Ø17.5 [0.69]
190 [7.48]
45°
45°
191 [7.52]
S1
R
S2
FM2
265.9 [10.47]
242.7 [9.555]
202.1 [7.95]
194 [7.64]
99 [3.897]
1” 1/4 SAE 6000
Visto da C/Detail C
166.2 [6.54]
136.9 [5.389]
C
A B
1” 1/4 SAE 6000
M14 Prof. 19
M14 Depth [0.748]
31.75 [1.25]
66.68 [2.625]
VM2 LM2
225.3 [8.87]
262 [10.31]
194 [7.64]
99 [3.897]
66.68 [2.625]
1” 1/4 SAE 6000
1” 1/4 SAE 6000
Visto da C/Detail C
M14 Prof.19
M14 Depth [0.748]
159.6 [6.29]
135.7 [5.34]
31.75 [1.25]
C
A
B
265.9 [10.47]
194 [7.64]
212.8 [8.377]
Visto da C/Detail C
1” 1/4 SAE 6000
166.2 [6.54]
111.9 [4.405]
Ø32 [Ø1.26]
Ø32 [Ø1.26]
31.75 [1.25]
66.68 [2.625]
C
M14 Prof.25
M14 Depth [0.984]
A
B
1” 1/4 SAE 6000
43 [1.69]
M12
Key
12x8x63 UNI 6604
40 [1.57]
120 [4.73]
28 [1.10]
Ø 40
0.018
0.002
[Ø1.574 ]
0.0007
0.00007
48.5 [1.91]
M16
14x9x63 UNI 6604
Key
40 [1.57]
120 [4.73]
36 [1.42]
Ø 45
0.018
0.002
[Ø1.771 ]
0.0007
0.00007
Ø39.6 [1.56]
M12
Spline
W40x2x30x18x9g DIN 5480
37.4 [1.47]
23 [0.91]
85 [3.35]
40 [1.57]
Ø44.5 [1.75]
M16
Spline
W45x2x30x21x9g DIN 5480
42 [1.65]
36 [1.42]
90 [3.54]
40 [1.57]
CAK
Parallel
keyed shaft
CAJ
Parallel
keyed shaft
SAO
Splined
shaft
SAP
Splined
shaft
i
Click i button to return to main index Click Dana button to return to Section index
Dimensions ISO 4 Bolts ange (OE)
S1, S2: Drain ports (1 plugged) - 1/2 G (BSPP)
A, B: Service line ports
R: Air bleed (plugged) - 1/8 G (BSPP)
7
Port cover
6
Shaft end
Detail C
Detail C
Detail C
19 [0.748] Depth
19 [0.748] Depth
25 [0.984] Depth
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B18
SH11C 160-180 ME
200.5 [7.893]
25 [0.98]
16.8 [0.66]
Ø178 [7.01]
37.2 [1.46]
10 [0.39]
71.8 [2.827]
13.9 [0.547]
113 [4.449]
Ø180 [7.087 ]
0
-0.025
0
-0.0098
40°
Ø224 [8.819]
Ø17.5 [0.69]
210 [8.27]
45°
45°
210 [8.27]
S1
R
S2
LM2 FM2
VM2
293.7 [11.56]
202 [7.95]
236.5 [9.31]
1” 1/4 SAE 6000
191.4 [7.54]
129.8 [5.11]
Ø32 [1.26]
Ø32 [1.26]
31.75 [1.25]
66.68 [2.625]
C
M14
Depth 25 [0.984]
A
B
1” 1/4 SAE 6000
293.7 [11.56]
267.9 [10.55]
210 [8.27]
202 [7.95]
99 [3.897]
1” 1/4 SAE 6000
191.4 [7.54]
156.2 [6.15]
C
A
B
1” 1/4
SAE 6000
M14
Depth 19 [0.748]
31.75 [1.25]
66.68 [2.625]
239.7 [9.44]
285.7 [11.25]
194 [7.64]
99 [3.897]
66.68 [2.625]
1” 1/4 SAE 6000
M14
Depth 19 [0.748]
189 [7.32]
149.2 [5.87]
31.75 [1.25]
C
A
B
1” 1/4 SAE 6000
48.5 [1.91]
M16
Key
14x9x70 UNI 6604
40 [1.57]
130 [5.12]
36 [1.42]
Ø 45
0.018
0.002
[1.77 ]
0.0007
0.00007
53.5 [2.11]
M16
Key
14x9x70 UNI 6604
40 [1.57]
130 [5.12]
36 [1.42]
Ø 50
0.018
0.002
[1.968 ]
0.0007
0.00007
Ø44.5 [1.75]
M16
Spline
W45x2x21x9g DIN 5480
42 [1.65]
36 [1.42]
90 [3.54]
40 [1.57]
Ø49.8 [1.96]
M16
Spline
W50x2x24x9g DIN 5480
47.8 [1.88]
36 [1.42]
95 [3.74]
40 [1.57]
i
Click i button to return to main indexClick DANA button to return to Section Index
S1, S2: Drain ports (1 plugged) - 1/2 G (BSPP)
A, B: Service line ports
R: Air bleed (plugged) - 1/8 G (BSPP)
7
Port cover
6
Shaft end
Dimensions ISO 4 Bolts ange (OF)
Detail C Detail C
Detail C
CBQ
Parallel
keyed shaft
CAX
Parallel
keyed shaft
SAP
Splined
shaft
SAR
Splined
shaft
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B19
VSD - VSS
SH11C 010-016 SE
130 [5.12]
39.3 [1.55]
Ø101 .6 [4]
9.7 [0.38]
12 [0.47]
73.3 [2.89]
11.1 [0.44]
59 [2.32]
40°
S1
R
S2
174 [6.85]
146 [5.75]
Ø14 [0.55]
LM1
C
190.7 [7.51]
1”1/16 12-2B
Depth 20 [0.79]
59.1 [2.33]
104.2 [4.10]
146.8 [5.78]
90 [3.54]
Detail C
97.57 [3.841]
117.4 [4.622]
169.37 [6.668]
48 [1.890]
48 [1.890]
1” 1/16 - 12 UN 2B
Depth 20 [0.79]
1” 1/16 - 12 UN 2B
Depth 20 [0.79]
46 [1.811]
Ø5/16-18 UNC
Spline
D.P. 16/32 Z13 ANSI B92.1
34 [1.34]
19
[0.75]
41.9 [1.65]
26 [1.02]
i
Click i button to return to main index Click Dana button to return to Section index
Dimensions SAE B 2 Bolts ange
S1, S2: Drain ports (1 plugged) - 3/4”-16 UNF 2B
A, B: Service line ports
R: Air bleed (plugged) - 7/16”-20 UNF 2B
7
Port cover
6
Shaft end
Detail C
S05
Splined
shaft
(02)
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B20
SH11C 020-030 SE
LM2 FM2
VM2
154.3 [6.08]
20 [0.79]
12.7 [0.50]
81 [3.19]
S2
S1
45°
146 [5.75]
146 [5.75]
Ø
162 [6.38]
40°
Ø 127
0
-0.05
[5.00 ]
0
-0.002
Ø
14.3 [0.56]
14.5 [0.57]67 [2.64]
45°
208.2 [8.20]
40.49 [1.594]
18.24 [0.718]
119 [4.69]
169.1 [6.66]
108.9 [4.29]
69.7 [2.75]
Visto da C/Detail C
5/16”-18 UNC 2B
1/2” SAE 6000
C
208.2 [8.20]
190.2 [7.49]
108.9 [4.29]
87.4 [3.44]
18.24 [0.718]
Visto da C/Detail C
127 [5.00]
59 [2.32]
40.49 [1.594]
5/16”-18 UNC 2B
1/2” SAE 6000
C
18.24 [0.718]
90.2 [3.55]
Visto da C/Detail C
200.8.7 [7.91]
176.1 [6.93]
1/2” SAE 6000
C
115 [4.53]
59 [2.32]
40.49 [1.594]
5/16”-18 UNC 2B
41.1 [1.62]
Key
6.35x6.2x28
[0.25x0.24x1.10]
24.9 [0.98]
Ø22.22 [0.874]
5/16”-18 UNC 2B
26 [1.02]
31 [1.22]
28 [1.10]
Spline
D.P. 12/24 Z14
ANSI B92.1 a 1976
Ø31.2 [1.228]
7/16”-14 UNC-2B
32 [1.26]
56 [2.20]
22 [0.86]
Spline
D.P. 16/32 Z13 ANSI B92.1
Ø21.8 [0.858]
5/16”-18 UNC-2B
31 [1.22]
41.1 [1.62]
i
Click i button to return to main indexClick DANA button to return to Section Index
S1, S2: Drain ports (1 plugged) - 3/4”-16 UNF 2B
A, B: Service line ports
R: Air bleed (plugged) - 7/16”-20 UNF 2B
7
Port cover
6
Shaft end
Dimensions SAE C 4 Bolts ange (O5)
Detail C
Detail C
Detail C
C16
Parallel
keyed shaft
S12
Splined
shaft
S05
Splined
shaft
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B21
SH11C 045-055-063 SE
163.2 [6.43]
34.1 [1.34]
12.7 [0.50]
17.5 [0.69]
S2
S1
45°
146 [5.75]
73 [2.87]
Ø
162 [6.38]
40°
Ø 127
0
-0.05
[5.00 ]
0
-0.002
Ø
14.3 [0.56]
79.5 [3.13]
15.5 [0.61]
45°
R
83.6 [3.29]
73 [2.87]
250.4 [9.86]
192.9 [7.60]
147 [5.79]
A B
3/4” SAE 6000
3/4” SAE 6000
147.9 [5.82]
50.8 [2.00]
23.8 [0.937]
88.4 [3.48]
C
3/8”-16 UNC 2B Depth 20 [0.79]
Ø19 [0.748]
Ø19 [0.748]
LM2 FM2
VM2
147 [5.79]
75 [2.953]
155 [6.10]
50.8 [2.00]
3/4” SAE 6000
3/4” SAE 6000
3/8”-16 UNC 2B Depth 18 [0.708]
23.8 [0.937]
250.4 [9.86]
218.6 [8.61]
C
147.9 [5.82]
109.9 [4.33]
229.1 [9.02]
199.2 [7.84]
50.8 [2.00]
147 [5.79]
75 [2.953]
3/4” SAE 6000
3/4” SAE 6000
C
132.2 [5.21]
111.1 [4.37]
23.8 [0.937]
3/8”-16 UNC 2B
Depth 18 [0.708]
32 [1.26]
Key
7.93x7.3x40 [0.31x0.287x1.57]
35 [1.38]
3/8”-16 UNC 2B
7.9 [0.31]
55.5 [2.19]
Ø 31.75
0
-0.05
[1.25 ]
0
-0.0019
32 [1.26]
Spline
D.P. 12/24 Z14 ANSI
B92.1 a 1976
Ø31.2 [1.23]
3/8”-16 UNC-2B
39.6 [1.56]
55.5 [2.19]
7.9 [0.31]
i
Click i button to return to main index Click Dana button to return to Section index
7
Port cover
6
Shaft end
Dimensions SAE C 4 Bolts ange (O5)
S1, S2: Drain ports (1 plugged) - 1” 1/16 - 12 UN 2B
A, B: Service line ports
R: Air bleed (plugged) - 7/16”-20 UNF
Detail C
Detail C
Detail C
C17
Parallel
keyed shaft
S12
Splined
shaft
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B22
SH11C 075-090 SE
LM2 FM2
VM2
40°
180.9 [7.122]
20 [0.79]
93 [3.661]
S2
S1
45°
146 [5.75]
73 [2.87]
Ø
162 [6.377]
Ø 127
0
-0.05
[5.00 ]
0
-0.002
Ø
14.3 [0.56]
13.3 [0.523]
87.7 [3.452]
45°
73 [2.87]
R
12.7 [0.50]
39 [1.535]
256.9 [10.11]
166 [6.54]
207.4 [8.165]
1” SAE 6000
1” SAE 6000
148.5 [5.85]
Ø25 [0.98]
Ø25 [0.98]
95.1 [3.744]
27.76 [1.093]
57.15 [2.25]
C
7/16”-14 UNC 2B
Depth 18 [0.709]
A B
256.9 [10.11]
232.7 [9.161]
174 [6.85]
166 [6.54]
57.15 [2.25]
84 [3.307]
1” SAE 6000
1” SAE 6000
148.5 [5.85]
27.76 [1.093]
116.3 [4.578]
C
7/16”-14 UNC 2B
Depth 18 [0.709]
216.4 [8.519]
166 [6.54]
84 [3.307]
57.15 [2.25]
1” SAE 6000 1” SAE 6000
144.4 [5.69]
124.5 [4.901]
27.76 [1.093]
249.5 [9.82]
C
7/16”-14 UNC 2B
Depth 18 [0.748]
32 [1.26]
Spline
D.P. 12/24 Z14 ANSI
B92.1 a 1976
Ø31.15 [1.22]
3/8”-16 UNC-2B
39.6 [1.56]
55.6 [2.18]
8 [0.315]
36 [1.42]
A 11.11 x 9.2 x 60
Key
Ø
44.45
0
-0,05
1,75
0
-0,0020
66.5 [2.62]
49.15 [1.94]
1/2” 20 UNF
74.5 [2.93]
i
Click i button to return to main indexClick DANA button to return to Section Index
7
Port cover
6
Shaft end
Dimensions SAE C 4 Bolts ange (O5)
S1, S2: Drain ports (1 plugged) - 1” 1/16-12 UN 2B
A, B: Service line ports
R: Air bleed (plugged) - 7/16”-20 UNF 2B
Detail C
Detail C
Detail C
S12
Splined
shaft
C18
Parallel
shaft
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B23
SH11C 108-125 SE
LM2 FM2
VM2
215.8 [8.496]
49.6 [1.952]
12.7 [0.50]
24.9 [0.98]
59.5 [2.342]
15.3 [0.602]93 [3.661]
Ø152.4 [6.00 ]
0
-0.05
0
-0.0019
40°
Ø228.6 [9.00]
Ø20.6 [0.81]
200 [7.87]
45°
45°
200 [7.87]
S1
R
S2
297.9 [11.73]
194 [7.64]
244.9 [9.641]
1” 1/4 SAE 6000
166.2 [6.54]
111.8 [4.401]
Ø32 [1.26]
Ø32 [1.26]
31.75 [1.25]
66.68 [2.625]
C
A
B
1/2”-13 UNC 2B Depth 25 [0.984]
297.9 [11.73]
274.8 [10.818]
202.1 [7.95]
194 [7.64]
99 [3.897]
Visto da C/Detail C
166.2 [6.54]
136.9 [5.389]
C
A B
31.75 [1.25]
66.68 [2.625]
1/2”-13 UNC 2B Depth 19 [0.748]
1” 1/4 SAE 6000
1/2”-13 UNC 2B Depth 19 [0.748]
294 [11.58]
257.3 [10.129]
194 [7.64]
99 [3.897]
66.68 [2.625]
1” 1/4 SAE 6000
1” 1/4 SAE 6000
159.8 [6.29]
135.7 [5.34]
31.75 [1.25]
C
A
B
36 [1.42]
Key
11.11x9.2x60 [0.43x0.36x2.36]
49.1 [1.94]
1/2” 20 UNF
7.86 [0.31]
74.4 [2.93]
Ø 44.4
0
+0.05
[1.748 ]
0
+0.0019
36 [1.42]
Spline
D.P. 8/16 Z13 ANSI
B92.1 a 1976
Ø43.9 [1.73]
1/2” 20 UNF
55.1 [2.17]
74.9 [2.95]
7.86 [0.31]
36 [1.42]
Spline
D.P. 16/32 Z23 ANSI
B92.1 a 1976
Ø38 [1.50]
1/2” 20 UNF
54 [2.13]
69.7 [2.75]
7.86 [0.31]
i
Click i button to return to main index Click Dana button to return to Section index
7
Port cover
6
Shaft end
S1, S2: Drain ports (1 plugged) - 1” 1/16-12 UN 2B
A, B: Service line ports
R: Air bleed (plugged) - 7/16”-20 UNF
Dimensions SAE D 4 Bolts ange (O8)
Detail C
Detail C
Detail C
C18
Parallel
keyed shaft
S15
Splined
shaft
S16
Splined
shaft
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B24
SH11C 160-180 SE
LM2 FM2
VM2
48.9 [1.925]
103.9 [4.09]
25 [0.98]
13.2 [0.519]
113 [4.449]
Ø152.4 [6.087 ]
0
-0.05
0
-0.0019
40°
Ø228.6 [9.00]
Ø21 [0.83]
200 [7.87]
45°
45°
200 [7.87]
S1
R
S2
232 [9.134]
12.7 [0.50]
325.8 [12.83]
202 [7.95]
268.6 [10.58]
1” 1/4 SAE 6000
188.6 [7.43]
129.8 [5.11]
Ø32 [Ø1.26]
Ø32 [Ø1.26]
31.75 [1.25]
66.68 [2.625]
C
A
B
1” 1/4 SAE 6000
1/2”-13 UNC 2B Depth 19 [0.748]
325.8 [12.83]
300 [11.81]
210 [8.27]
202 [7.95]
99 [3.897]
1” 1/4 SAE 6000
188.6 [7.43]
156.2 [6.15]
C
A
B
31.75 [1.25]
66.68 [2.625]
1/2”-13 UNC 2B Depth 19 [0.748]
1” 1/4 SAE 6000
271.8 [10.70]
317.8 [12.51]
194 [7.64]
99 [3.897]
66.68 [2.625]
1” 1/4 SAE 6000
186 [7.32]
149.2 [5.87]
31.75 [1.25]
C
A
B
1” 1/4 SAE 6000
1/2”-13 UNC 2B Depth 19 [0.748]
36 [1.42]
Key
11.11x9.2x60 [0.43x0.36x2.36]
49.1 [1.94]
1/2” 20 UNF
12.6 [0.5]
79.2 [3.12]
Ø44.4
0
+0.05
[1.748 ]
0
+0.0019
36 [1.42]
Spline
D.P. 8/16 Z13 ANSI
B92.1 a 1976
Ø43.9 [Ø1.73]
1/2” 20 UNF
55 [2.17]
75.8 [2.97]
7.86 [0.31]
C18
Albero
cilindrico
S15
Albero
scanalato
i
Click i button to return to main indexClick DANA button to return to Section Index
7
Port cover
6
Shaft end
Dimensions SAE D 4 Bolts ange (O8)
S1, S2: Drain ports (1 plugged) - 1” 1/16-12 UN 2B
A, B: Service line ports
R: Air bleed (plugged) - 7/16”-20 UNF
Detail C
Detail C
C18
Parallel
keyed shaft
S15
Splined
shaft
Detail C
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B25
A
B
C
D
A
B
i
Click i button to return to main index Click Dana button to return to Section index
Flushing valve
(06-09-15)
Arranged for ushing valve
(PR)
ME SE
010 020 045-055 075 108 160 010 020 055 075 108 160
016 030 063 090 125 180 016 030 063 090 125 180
A
mm
[in]
–
225
[8.85]
245.7
[9.67]
259.4
[10.21]
294.3
[11.58]
319.6
[12.58]
–
242
[9.52]
269.8
[10.62]
283.5
[11.16]
326.4
[12.85]
351.7
[13.85]
B
mm
[in]
–
130
[5.11]
152.8
[6.01]
159.1
[6.26]
179.9
[7.08]
199.1
[7.84]
–
130
[5.11]
152.8
[6.01]
159.1
[6.26]
179.8
[7.08]
199.1
[7.84]
C
mm
[in]
–
204
[8.03]
225.7
[8.88]
239.4
[9.42]
274.3
[10.79]
299.6
[11.79]
–
221
[8.70]
204
[9.83]
263.5
[10.37]
306.4
[12.06]
331.7
[13.05]
D
mm
[in]
–
120
[4.72]
142.8
[5.62]
149.1
[5.87]
169.9
[6.68]
189.1
[7.44]
–
120
[4.72]
142.8
[5.62]
149.1
[5.87]
169.8
[6.68]
189.1
[7.44]
Other caratteristics
7 + 12
Version with ushing valve version and port cover “LM2”
ME SE
010 020 045-055 075 108 160 010 020 055 075 108 160
016 030 063 090 125 180 016 030 063 090 125 180
A
mm
[in]
–
211
[8.31]
239.2
[9.41]
258.8
[10.18]
298.8
[1.76]
313.2
[12.33]
–
229
[9.01]
263.3
[10.36]
282.9
[11.13]
330.8
[13.02]
345.3
[13.59]
B
mm
[in]
–
173
[6.81]
193.6
[7.62]
205.2
[8.08]
218.2
[8.59]
231.7
[9.12]
–
173
[6.81]
193.6
[7.62]
205.2
[8.08]
218.2
[8.59]
231.7
[9.12]
7 + 12
Version with ushing valve version and port cover “VM2”
Flushing valve
(06-09-15)
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
B26
A
B
A
B
T1
A
B
T2
T1
A
B
T2
103.2 [4.06]
97.6 [3.84]
157.3 [6.19]
A
B
A
B
T1
A
B
T2
T1
A
B
T2
97.6 [3.841]
116.3 [4.581]
169.4 [6.668]
i
Click i button to return to main indexClick DANA button to return to Section Index
A - B Service ports M22x1.5
T1- T2 Drain ports 3/8 G (BSPP)
A - B service ports SAE 10 - 7/8 14 UNF 2B
T1- T2 Drain ports SAE 6 - 9/16 18 UNF 2B
Rear cover VMD
Clockwise
Rear cover VSD
Clockwise
Rear cover VMS
Counterclockwise
Rear cover VSS
Counterclockwise
Other caratteristics
7
Lateral ports same side and unidirectional valve “VMD-VMS”
7
Lateral ports same side and unidirectional valve “VSD-VSS”
B27
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
S1
S2
S1
S2
i
Click i button to return to main index Click Dana button to return to Section index
For the SH11C is possible to request the drain plug reversed compared to standard.
If it is necessary in this configuration, to specify in the purchase order the value “RD” (see position 13 of ordering code).
STANDARD VERSION “RD” VERSION
S1 - Metallic plug.
S2 - Plastic plug.
S1 - Plastic plug.
S2 - Metallic plug.
Other caratteristics
13
Drain plug reversed “RD”
B28
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
13
Version with tachometer and sensor “TZ”
B
A
ME SE
020 045-055 075 108 160 020 045-055 075 108 160
030 063 090 125 180 030 063 090 125 180
A mm
[inch]
61.5
[2.42]
56.5
[2.22]
63
[2.48]
74
[2.91]
74.5
[2.93]
78.5
[3.09]
81
[3.18]
88
[3.46]
106
[4.17]
107.5
[4.23]
B mm
[inch]
57
[2.24]
68.5
[2.69]
71.7
[2.82]
77.4
[3.04]
85
[3.34]
57
[2.24]
68.5
[2.69]
71.7
[2.82]
77.4
[3.04]
85
[3.34]
Size
020 045-055 075 108 160
030 063 090 125 180
Number of pulses per revolution
38 47 53 59 67
i
Click i button to return to main indexClick DANA button to return to Section Index
2-Channel differential-hall effect operating principle Sensor with dual-channel output (90°)
Power supply 8-32 VDC
Frequency 0-20.000 Hz
Operating temperature -40°C +125°C
Degree of protection IP67
Sensor connector Deutsch DT04-4P
Electromagnetic compatibility according to EN 60947-5-2
Resistence to schock and vibration in accordance with IEC 68-2-17 IEC 68-2-6
Other caratteristics
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
i
Click i button to return to main index Click Dana button to return to Section index
DC5A1G1_0000000R2 - 03/24
SH11C/M - Section B
i
Click i button to return to main indexClick DANA button to return to Section Index